Filter
Top Products
39
Powering On the Printer
CAUTION: The fusing area at the rear part of the inside of your printer becomes hot once the
printer is powered on.
CAUTION: Be careful not to be burned when you access this area.
CAUTION: Do not disassemble the printer when it is powered on. If you do, it may give you an
electric shock.
To power on the printer:
1
Plug one end of the power cord into the power receptacle at the back of the printer and
the other end into a properly grounded outlet.
2
Press the power switch to turn on the printer. The home screen appears on the display
indicating that the printer is now on.
NOTE: If you power on the printer for the first time, you have to set the language, date, time,
country and fax setup sequence. These settings may be needed also after the firmware upgrade or
after the printer is reset.
Setting fax setup sequence
1
Set the language. See "Changing the Display Language".
2
Select the country. See "Selecting Country".
3
Set the date and time. See "Setting the Time and Date".
4
When fax setup confirmation window
appears
,
select or .
If you selected , your printer restores the fax settings as default.
If you selected :
a
Your printer prints out a Fax Setup Help Report.
b
Enter the machine ID. See "Setting the Printer ID".
c
Select the receive mode and ring to answer. See "Setting up the Fax System".