Filter
Top Products
195
When the
DRPD
feature is set up, the
DRPD
option is available in the
Receive Mode
menu.
To receive faxes in the
DRPD
mode, you need to set the menu to
DRPD
; see "Available Fax
Defaults Options".
NOTE: DRPD must be set up again if you re-assign your fax number, or connect the printer to
another telephone line.
NOTE: After DRPD has been set up, call your fax number again to verify that the printer answers
with a fax tone. Then call a different number assigned to that same line to ensure the call is
forwarded to the extension telephone or answering machine plugged into the extension telephone
socket ( ) on the back of the printer.
Receiving Faxes in the Memory
Since your printer is a multi-tasking device, it can receive faxes while performing other tasks. If
you receive a fax while you are copying, printing, or run out of paper or toner, your printer
stores incoming faxes in the memory. As soon as you finish copying, printing, or resupply the
consumables, the printer automatically prints the fax.
Automatic Dialing
Speed Dialing
You can store up to 400 frequently dialed numbers in one, two or three-digit speed dial
locations (0-399).
Storing a Number for Speed Dialing
1
Press
Setup
Machine Setup
from the home screen.
2
Press the
Next
( ) button.
3
Press the up/down arrows to select
Email/Fax List
.
4
Press
Fax List
View List
.
5
Press
Individual
.
6
Press the button
Add
.
7
Enter the name and phone number in the each field with the pop up keyboard. And then
enter the speed dial using keypad.
8
Press to go to the upper menu.
9
Press or when the confirmation window appears.
10
Press the home icon ( ) to return to the Standby mode.