Filter
Top Products
18
NOTE: Use the telephone line cord supplied with your printer. If you choose to use a different cord,
use an AWG #26 or lower gauge cord that is not more than 250 cm (98 inches) in length.
NOTE: The power cord must be plugged into a grounded power socket.
3
Save the carton and packing material in case the printer needs to be repacked.
4
Remove the packing tape from the front, back, and sides of the printer.
5
Remove the label completely from the scanner module by gently pulling it. The scan
unlock switch should move forward to the unlock position as the label is pulled out.
c Quick Reference Guide may not be provided with your product depending on your country.