Filter
Top Products
24 About Your System
E1211 ROMB Batt RAID battery is either
missing, bad, or unable to
recharge due to thermal
issues.
Reseat the RAID battery
connector. See
"Troubleshooting a SAS or
SAS RAID Controller" on
page 145, and
"Troubleshooting System
Cooling Problems" on
page 134.
E1214 ##
PwrGd Specified voltage regulator
has failed.
See "Getting Help" on
page 165.
E1215 ##
PwrGd Specified voltage regulator
has failed.
See "Getting Help" on
page 165.
E1226 PCI Rsr 1.5V
PwrGd
1.5V Riser Card Power Good
failure.
See "Getting Help" on
page 165.
E1229 CPU # VCORE Processor # VCORE voltage
regulator has failed.
See "Getting Help" on
page 165.
E122A CPU VTT PwrGd Processor # VTT voltage has
exceeded the allowable
voltage range
See "Getting Help" on
page 165.
E1310 RPM Fan ## RPM of specified cooling
fan is out of acceptable
operating range.
See "Troubleshooting
System Cooling
Problems" on page 134.
E1311 FAN MOD ##
RPM
RPM of specified cooling
fan module is out of
acceptable operating range.
See "Troubleshooting
System Cooling
Problems" on page 134.
E1313 Fan
Redundancy
The system is no longer fan-
redundant. Another fan
failure will put the system at
risk of over-heating.
Check control panel LCD
for additional scrolling
messages. See
"Troubleshooting System
Cooling Problems" on
page 134.
Table 1-6. LCD Status Messages (continued)
Code Text Causes Corrective Actions