Filter
Top Products
84 Installing System Components
Removing the Fan Assembly
CAUTION: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before performing any
procedure, see your Product Information Guide for complete information about
safety precautions, working inside the computer and protecting against
electrostatic discharge.
1
Open the system. See "Opening and Closing the System" on page 68.
2
Remove the system board shroud. See "Removing the System Board
Shroud" on page 71.
3
Disconnect the fan connectors on the system board FAN_MOD1 and
FAN_MOD2. See Figure 3-10.
4
While pulling the two release levers on the fan assembly, lift the fan
assembly off of the two securing posts and out of the chassis. See
Figure 3-10.