Filter
Top Products
92 Installing System Components
RAC Card
The optional Remote Access Controller (RAC) provides a set of advanced
features for managing the server remotely.
Removing the RAC Card
CAUTION: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. See your Product
Information Guide for complete information about safety precautions, working
inside the computer, and protecting against electrostatic discharge.
1
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2
Open the system. See "Opening the System" on page 69.
3
Remove any expansion cards on the center (slot 1) riser board. See
"Removing an Expansion Card" on page 96.
4
Remove the center riser card. See "Removing the Riser Card" on page 98.
5
Disconnect the short ribbon cable to the system board. See Figure 3-14.