Filter
Top Products
Installing System Components 71
Removing the System Board Shroud
CAUTION: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before performing any
procedure, see your Product Information Guide for complete information about
safety precautions, working inside the computer and protecting against
electrostatic discharge.
1
Open the system. See "Opening and Closing the System" on page 68.
2
If applicable, disconnect the SAS cable connector on the expansion card.
3
Locate the attachment slots on the left and right sides of the fan modules
and in front of the memory modules. See Figure 3-5.
4
Grasping the right and left sides, gently lift the shroud straight up and
away from the fan assembly. See Figure 3-5.
5
Remove the system board shroud.