Filter
Top Products
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
Hardware Installation
page 12 of 85 V1.3
Fig 2.7-1 Mounting the Linking Device ready for use: the SOFTING Foundation Fieldbus Interface Module FIM 110
The Linking Device is convection-cooled. It therefore needs to be installed in such a way that
the ventilating ducts are at the top and bottom of the unit.
Please ensure against the direct contact with the sunlight.
2.8 Installation Overview
The whole installation is wired as shown in the picture.
The network connectivity of the PC is part of the private Ethernet. The connectivity between
H1 Links and H1 Devices is realized by shielded twisted pair. The maximum distance
depends on the numbers of H1 Devices and other surrounding conditions, normally 1900 m.
i