Filter
Top Products
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
Linking Device FG-110 FF - Internal Web Server
page 32 of 85 V1.3
Another window appears with a table where the valid Points for this point page are listed.
Over the table there is an input box with the name of the point page.
If you change this name you get a new point page with all the attributes of the chosen point
page.
The table below the page name has five columns. The first column is named “Point”. Under
this column, the possible Out-Blocks (AI Function Blocks) are listed. Beside the file name
you find a search field <…> for choosing another .out file from a file list.
The second column of the edit table is named “Name”. It can contain a name of the Function
Block.
The third column is named “Description”. In this field it is possible to type the description of
the Function Block.
In the next column “Up/Down” you can scroll the list. The last column “Delete” contains a
<Delete> button for each .out file in the table.
Under the table the buttons <Save Changes> and <New Point> are arranged. When you
press one of the buttons you can either save the changes of the point page or create a new
point.
Fig 4.5-9 Create a new Point or change pages
To save the changes click <Save Changes>.
To create a new Page click <New Point Page>. The input data of a new Point Page must be
treated in the same way as when existing Point Pages are changed.
After <Save Changes> and clicking <Point Pages> you see the data of all your pages again,
possibly including a new page. Without <Save Changes> the existing data remains
unmodified.
4.5.3.2 <Configuration><Page Options><Point Columns>
When you click <Configuration> <Page Options> <Point Columns> a table with various point
columns appears on the screen. A check mark in the check box right beside the point
columns enables the point columns. If the check box is empty the column is disabled and
does not appear in the point page. In this way you can build the format you need.