Filter
Top Products
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
FF-CONF Configure your plant
page 72 of 85 V1.3
5.8.2.7 Block types first approach
You can also enter the instance of a block type without device association to a function block
application by clicking the *button of a selected block type.
Fig 5.8-10 Add a block type
Now you can configure your function block application as described above and then
associate the blocks to the blocks of the device via the associate button. When you
associate a block, both the block tag and the configured parameters from the function block
application are used to configure the specific block on the configured device. The device tag
of the device is then listed within the function block application.
Fig 5.8-11 Associate a Function Block