Filter
Top Products
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
Linking Device FG-110 FF - Internal Web Server
page 28 of 85 V1.3
You can install user passwords for four user groups. Fill in the new password and confirm
your input with a second input. The input mode is always the same for all user groups.
When you click the button <Change Password> the passwords will be changed and
activated the next time you enter the web site.
The administrator can modify any system or field device setting. Thus use caution when
changing the administrator password. If the administrator password is lost, you will not be
able to set up the Linking Device und and it is necessary for a staff member of Softing to
reset the password.
4.5.2 <Configuration><System Maintenance>
4.5.2.1 <Configuration><System Maintenance><Restart>
Restart causes the start of the program from the beginning with all settings stored last.
Fig 4.5-4 Restart of the HSE Device
Pressing the button <Restart now> causes another window to appear with the question
whether the restart of the device is desired. Seek the required file and
● Click <OK> to start the restart of the device.
Click <Cancel> to return the program to the beginning. Each setting is persistent.
4.5.2.2 <Configuration><System Maintenance><Firmware>
Clicking the button <seek> the Firmware Update page opens a file selector box to select the
firmware file to be downloaded. Click <Download Firmware and Reboot> to start the
download process. Firmware download and flash memory update take between one and two
minutes. You can observe the progress of the update process in the browser window.
During Reboot, the IP connection between PC and Linking Device will be lost.
Do not access the web server of the Linking Device before the SUCCESS message is
displayed in the browser window. If you do so, you will have to clear the cache of your web
browser after the boot process has finished, and then re-establish a connection to the web
server of the Linking Device.
The end of the boot process is indicated by a reboot of the Linking Device.