Filter
Top Products
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
Linking Device FG-110 FF - Internal Web Server
page 26 of 85 V1.3
<Change Settings and Reboot>
When you click the button <Change Settings and Reboot> the web site shuts down and the
system reboots.
The input values will be checked for consistency. If the input values are not consistent, the
Linking Device will propose consistent values. You can use the proposed values by clicking
<yes> or keep the values you entered by selecting <no>.
The Linking Device will be rebooted after a few seconds and the new values will be
accepted.
If you change the IP address of the Linking Device, the IP connection between PC and
Linking Device will be lost. You have to use the new IP address to re-establish web access
to the Linking Device.
If all parameters are correct, the new values are accepted and displayed.
<Read Current Values>
If you changed some of the parameters and you are not sure of your changes, click the
button <Read Current Values>. Input fields which are already filled are shown again.
Do not access the web server of the Linking Device before the NEW
NETWORK SETTINGS or ERROR OCCURED message is displayed in
the browser window. If you do so, you will have to clear the cache of
your web browser after the boot process has finished, and then re-
establish a connection to the web server of the Linking Device.
4.5.1.3 <Configuration><Settings><LD Settings>
Fig 4.5-2 Configuration of Linking Device Settings
Each Linking device gets a unique PD-Tag which includes the serial number.
The Webpage “LD-Settings” can be used to change the PD-Tag of the Linking device, the
Link ID as well as the Node Address of the H1 links.
i