Filter
Top Products
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
FF-CONF Configure your plant
page 64 of 85 V1.3
In the same way you can pull down the tab Network configuration. So you get two windows
in variable size and positions. This way you have the best possibilities to compare and
commission your project. You’ll see it below in the screenshot.
Fig 5.7-5 Two variable windows to compare and adapt the Network Configuration and the Network Livelist
Fig 5.7-6 Reset of the Layout
To establish the connection between a configured device and one which exists physically,
select the physical device within the live list. You have to assign the Linking Device and H1
Link first, then the H1 devices. To establish the connection between a configured device and
one which exists physically, select the physical device within the live list.
You have to assign the Linking Device and H1 Link first, then the H1 devices.
If you see different tag names, please take into consideration that there is a difference
between user tags and FF PD tags. Therefore refer to chapter Tag Names.