Filter
Top Products
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
V1.31 page 85 of 85
Close inspection: defines an inspection which encompasses those aspects covered by a visual
inspection and, in addition, identifies those defects, such as loose bolts, which will be apparent only be
the use of access equipment, for example steps, where necessary, and tools.
Detailed inspection: defines an inspection which encompasses those aspects covered by a close
inspection and, in addition, identifies those defects, such as loose terminations, which will only be
apparent by opening the enclosure, and/or using, where necessary, tools and test equipment.
a. Maintenance works are to be carried out by qualified personnel only, i.e. personnel qualified
according to TRBS 1203 or similar.
b. Only such auxiliary components may be used in potentially explosive atmospheres which meet
all requirements of European and national directives and legislation.
c. Components may only be replaced by original spare parts which are also approved for the use in
Ex-atmospheres.
d. Inside the Ex-atmosphere the equipment has to be serviced and cleaned regularly. The intervals
are to be defined by the operator in compliance with the environmental rules valid at the place
of operation.
e. After maintenance and repair works have been performed, all barriers and notes removed for
that purpose have to be put back in their original place.
f. In case faults of the equipment are noticed, remove the equipment. The inner parts cannot be
maintained by the customer. Instead, send the equipment to the manufacturer for inspection.
Activity
Visual
inspection
monthly
Close inspection
every 6 months
Detailed inspection
every 12 months
1
Visual inspection of lining device for
intactness, removal of dust settlements
●
1
2
Check of entire system
Operator’s responsibility
9.8 Disposal
Packaging material and worn components shall be disposed of according to the regulations applicable
in the country of installation.
1
Can be shortened or extended taking local conditions into account.