Filter
Top Products
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
FF-CONF Configure your plant
V1.31 page 69 of 85
Fig 5.8-5 Click FB Parameter View
Next you see the block parameters and can changes the values.
Fig 5.8-6 Change values of the block parameters
First select the parameter to change within the grid. Please look at the column “Handling” for
the information on whether the parameter is read/write or read only. Read only parameters
cannot be changed and therefore no edit field is displayed.
Then edit the value within the edit field “parameter value” at the bottom of the view or select
from the combo box. The parameters marked yellow are different to the default values.
To finish the configuration, press set and save the project.
5.8.2.5 Change Block Tags
You can change the block tags to get a better overview of where the block is situated, what
its special function is and so on. For the valid character set please see the chapter on