Filter
Top Products
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
Linking Device FG-110 FF - Internal Web Server
V1.31 page 31 of 85
If the Linking Device is connected to a network and if you want to use this feature, you can
select a timeserver at your facility or one near you geographically to ensure accurate time
adjustments. The device will function properly with this feature disabled but data time stamps
will be less accurate and time updates must be entered for each Linking Device. To use a
network time server, check the box <Network Time Protocol> (NTP), enter the IP address of
the time server and select the appropriate NTP packet version.
If a HSE SNTP server is configured then all other fields are greed out.
Alternately you can set the time manually. This is accomplished by checking the box
<Manual Entry>. This will enable you to enter information in the <Date> and <Time> fields.
In both cases you must confirm the input by clicking the button <Set Time>. Until then your
input will be activated.
4.5.3 <Configuration><Page Options>
Click <Configuration> <Page Options> to configure the Point Pages, the Point Columns and
the Home Page.
4.5.3.1 <Configuration><Page Options><Point Pages>
Point Pages provide a means to view the PV or Output of a Function Block and its status on
one or more web pages. Multiple pages can be configured to fit the application. Click
<Configuration> <Page Options> <Point Pages> to display the current list of Point Pages.
Fig 4.5-8 Create Pages to select information of your whole plant
With the button < >< > you can move the chosen point page so that the pages are sorted
in the order you desire.
To delete a point page which already exists, press the button <Delete> in the line of the point
page you want to erase.
To change the content of a listed point page, press the button <Edit> in the line where the
desired point page is listed.