Filter
Top Products
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
FF-CONF Configure your plant
page 60 of 85 V1.3
5.6.4 Add an H1 Link to a Linking Device
Next you add an H1 Link. You use the context menu to do this, using the right mouse button
to click on the HSE_Device object.
Fig 5.6-5 Add an H1 Link to the HSE Device
The H1 Link will be configured, the Port Number and the LinkID are set automatically, but in
any case you have to enter a new NodeID. If it is necessary you also can change the Port
Number and the LinkID. The port numbers are the physical ports of your linking device.
Fig 5.6-6 Change port number, LinkID or NodeID of the H1 Link
You will find an important function in the context menu of the H1 link object: <Get Min Bus
Parameters>. It optimizes the bus parameters in such a way that all the configured H1
devices on the link will be able to communicate.
Fig 5.6-7 Optimizing the bus parameters with <Get Min Bus Parameters>