Filter
Top Products
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
FF-CONF Configure your plant
page 62 of 85 V1.3
5.7 Network Livelist
The commissioning of your plant needs to adapt the data of your Network Configuration to
the installation which really exists (Network Livelist). You must perform the next steps to do
this.
5.7.1 Set the online status
Fig 5.7-1 The two options to go online
When you start the program FF-CONF the function <online> is not active. The Network
Livelist is not shown. The condition to show the Network Livelist is being in the online status.
In the options displayed above you can switch to the online status. Opening the network
livelist via menu <View><Network Livelist> automatically activates the online status.
5.7.2 Display the Network Livelist
The menu item <Network Livelist> shows active devices of your Foundation Fieldbus
network. You can compare the planned project and the physical devices by comparing
<Network Configuration> view and <Network Livelist> view.
Fig 5.7-2 Your first look at the Network Livelist