Filter
Top Products
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
FF-CONF Configure your plant
V1.31 page 59 of 85
5.6.3 Add a Linking Device (HSE)
To add a Linking Device to the configuration press the green button to the left of the
selected Linking Device in the list Device Types.
Fig 5.6-2 Add an HSE Device
Below the subnet field an instance of the selected device type appears on the screen.
In the field of the
Linking Device you must enter the IP address which matches the real IP
5Address of the Linking Device. It also can be the IP address you want to use in your
planned configuration.
After pressing the top right-hand button in the Linking Device field you can change the IP
address. Press the button on the bottom right in the Linking Device field to change the User
Tag.
Fig 5.6-3 Change IP Address
Fig 5.6-4 Change User Tag