Filter
Top Products
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
FF-CONF Configure your plant
V1.31 page 63 of 85
When you first change from <Network Configuration> to the <Network Livelist> you click on
the menu item <View> <Network Livelist>. Beside the menu items <Network Configuration>
and <Function Block application> the new menu item <Network Livelist> appears and is
active. Dependent on the size of the network, FF-CONF needs some time to update the
livelist. If you change the view to work with another part of FF-CONF the livelist works in the
background.
If you don’t see any devices which are physically available, please check
● physical connection and
● IP address range
Fig 5.7-3 The complete View “Network Livelist” – it shows you the devices which are really installed.
In the basic state of FF-CONF you can see either the Network Configuration view or the
Network Livelist view. If you want to see both pictures together use the function of
floating/docking windows. It is convenient to use a floating network livelist view to compare
configured and physical devices.
Fig 5.7-4 Pull down the Network Livelist