Filter
Top Products
Softing Linking Device –
Manual for Configuration, Installation and Maintenance
FF-CONF Configure your plant
page 44 of 85 V1.3
5.1.2.6 Online
When FF-CONF is started with a new or an existent project FF-CONF is in mode offline. You
can configure devices or build your Function Block application in this mode. If you want to
see the real installation – the Network Livelist – you must change to the online mode. When
you open the livelist with <View> <Network Livelist> the program automatically changes to
online. The idea of this functionality is to change back to offline if the user does not need
online functionality. Online might need lots of performance.
5.1.2.7 Settings
The <tool settings> define the several conditions for the process which follows later,
especially storage location and data, as well as startup conditions and time cycles.
The <project settings> define information about the project like the time cycle for autosave or
the project description.
5.1-7 Tool and Project Settings
Tool Settings
5.1-8 Tool Settings – you can define a lot of properties
You define library and file locations, time cycles and enable/disable some functions.
<Project Settings>
5.1-9 Project Settings