Filter
Top Products
5 - 42
NGA 2000
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
You have to put in the codes of the table into the corresponding lines of the submenu
"Program". If you have more than ten program steps, you can change to another menu
page with the F5 key(More...). Maximum of program steps: 100. Maximum of results: 20.
Putting in the codes in the menu:
♦ Select the program steps with the ↑↑ -key or the ↓↓ -key.
♦ Select the field for the code number with the 88 -key or the →→ -key.
♦ Select any digit with the ←← -key or the →→ -key and adjust the code number with
the ↑↑ -key or the ↓↓ -key. If necessary, change the sign (+/-) with the F4 key.
♦ Confirm the code with the 88 -key or cancel and go back to the last value with the F2 key.
Measure Back... More...
TAG
F1 F2 F3 F4 F5
95.00 ppm
-- Program --
Step (o+1): -2
Step (o+3): 162
Step (o+4): 218
Step (o+5): -5
Step (o+6): 40
Step (o+7): -6
Step (o+9): 118
Step (o+10): 168
Step (o+2): 112
Step (o+8): -2
Program offset (o): 0
Measure Back... More...
TAG
F1 F2 F3 F4 F5
95.00 ppm
-- Program --
Step (o+1): 212
Step (o+3): 41
Step (o+4): -6
Step (o+5): -7
Step (o+6): 0
Step (o+7): 0
Step (o+9): 0
Step (o+10): 0
Step (o+2): -5
Step (o+8): 0
Program offset (o): 10