Filter
Top Products
4 - 16
NGA 2000
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
Measure Back...
TAG
F1 F2 F3 F4 F5
37.50 ppm
-- Status Details --
Failures...
Function controls...
Measurements/Alarms...
Events...
Maintenance requests...
Acknowledge and clear failures !
Acknowledge and clear maintenance requests !
Acknowledge and clear function controls !
Measure Status... Channel Back... More...
MLT25/CH2/R2
F1 F2 F3 F4 F5
37.50 ppm
-- Analyzer Module Events (1/2) --
Failure: --.--.--
Function control/Service: --.--.--
Last configuration lost: --.--.--
Concentration alarm: --.--.--
Flow alarm: --.--.--
Linearization underflow: --.--.--
Maintenance request: --.--.--
Linearization overflow: --.--.--
Local analog output out of range: --.--.--
Calculator alarms active: --.--.--
Measure Status... Channel Back...
MLT25/CH2/R2
F1 F2 F3 F4 F5
37.50 ppm
-- Analyzer Module Events (2/2) --
Zero calibration started: --.--.--
Span calibration started: --.--.--
Span calibration finished: --.--.--
Concentration average alarm: --.--.--
Temperature alarm: --.--.--
Pressure alarm: --.--.--
Zero calibration finished: --.--.--
New linearization calculated: --.--.--
Sensor calibration: --.--.--
⇒ ⇒ Change to the
submenu "Analyzer
Module Events
(page 1 of 2)"
Press
or
⇒ ⇒ Change to the
second menu page
Press
F5
Note:
If any event has happened,
you will find a report of date
and time in the corresponding
line of this menu.
⇒ ⇒ Change to the
single component
display
Press
F1