Filter
Top Products
6 - 2
NGA 2000
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
Structure of chapter six:
The structure of chapter six is analogous to the structur of chapter five:
At the begin of any chapter you will find the way to a certain submenu of the MLT
software, starting from the line "System configuration and diagnostics..." in the "Main
Menu". The way will be described with the software catchwords, that you have to enter
one after another to reach the corresponding submenu. At the end of the catchword listing
you will find the illustration of the LCD screen. After that you can read the set-up
instructions and explanations containing further menu pictures, if necessary.
Example: You will bind micro processor controlled modules with analyzer modules.
Main Menu — System configuration
↓↓
Network module binding
↓↓
In the menu "Module Binding" you can bind with the analyzer modules the following types
of micro processor controlled I/O modules connected to the platform:
1) Analog Output with 3 Alarms I/O Module
2) Auto Calibration I/O Module
3) System Auto Calibration I/O Module
You can unbind all existing bindings between ...
Further explanations and setup instructions will follow !
Abort Add! Delete! Bind!
MLT25/CH2/R2
F1 F2 F3 F4 F5
95.00 ppm
-- Module Binding --
MLT25/CH1
MLT25/CH2
MLT25/CH3
MLT25/CH4
MLT25/CH5