Filter
Top Products
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
NGA 2000
6 - 9
Main Menu — System configuration and diagnostics
↓↓
Network module binding
↓↓
In the menu "Module Binding" you can bind with the analyzer modules the following types
of micro processor controlled I/O modules connected to the platform:
1) Analog Output with 3 Alarms I/O Module
2) Auto Calibration I/O Module
3) System Auto Calibration I/O Module
You can unbind all existing bindings between the analyzer module and the I/O modules, if
you press the F3 key (Delete!)
Module binding:
1) Selecting the channel:
• Change to the line you want with the ↑↑ -key or the ↓↓ -key.
• Press the 88 -key or the →→ -key resp. the F2 key (Add!) to change to the submenu
"Select IO Modules":
Abort Add! Delete! Bind!
MLT25/CH2/R2
F1 F2 F3 F4 F5
95.00 ppm
-- Module Binding --
MLT25/CH1
MLT25/CH2
MLT25/CH3
MLT25/CH4
MLT25/CH5
Measure
<<<
Back...
>>>
TAG
F1 F2 F3 F4 F5
37.50 ppm
-- Select IO Modules --
Select the modules you wish to bind to the current
I/O module with 3 alarms
Autocal I/O
Syscal I/O
analyzer.
6.4 Network Module Binding