Filter
Top Products
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
NGA 2000
6 - 5
Main Menu — System configuration and diagnostics
↓↓
Diagnostic menus
↓↓
Analyzer module diagnostics
↓↓
In the menu "Analyzer Module Diagnostics" you can find software error messages of the
analyzer module. If such messages are existing, you can act in the following way:
1) Make a note of the error messages.
2) Reset the message:
• Press the 88 -key or the →→ -key in the line "Edit to reset".
• Set up "Reset" with the ↑↑ -key or the ↓↓ -key and confirm it with the 88 -key:
The error messages will disappear, if their reason will not exist any longer
and the parameter "Report" will appear again, automatically.
• If the error messages are still existing, contact your customer service, please.
Measure Back...
TAG
F1 F2 F3 F4 F5
37.50 ppm
-- Analyzer Module Diagnostics --
Software error code (1 = no error): 1
And:
And:
And:
And:
And:
And:
Edit to reset: Report
Last software error message:
And:
6.1 Diagnostic Menus
6.1.2 Analyzer Module Diagnostics