Filter
Top Products
7 - 4
NGA 2000
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
♦ Select the line you want with the ↑↑ -key or the ↓↓ -key.
If there are more than eight modules available, you can change to another menu page
with the F5 key.
♦ Press the 88 -key or the →→ -key to enable the module selected as line source:
The display will go back to the menu "Auxiliary Lines", automatically.
The selection will be done.
Note:
To select the measurement parameter for each auxiliary line of the single component
display, you have to change to the menu "Measurement Display Configuration" of the
"Analyzer and I/O-module expert configuration" (see section 5.1.8 p. 5-49).
Measure
<<<
Back...
MLT25/CH2/R2
F1 F2 F3 F4 F5
95.00 ppm
-- First Auxiliary Line Source --
MLT25/CH2
>>>