Filter
Top Products
Advanced CMOS Setup
Typematic Rate Programming
This option allows you to customize the way your keyboard
operates. You can select enabled or disabled. (The default
setting is Disabled.) When enabled, the following options
are applicable:
0
Typematic Rate Delay determines how long it takes
for a key to repeat input when you hold it down. You can
choose
250, 500, 750,
or
1000
millisecond (ms) delays.
The
default setting is 500 ms.
0
Typematic Rate determines the speed at which
characters repeat when you hold down a key. The higher
the number, the faster the characters repeat. You can
choose 30, 24, 20, 15, 12, 10, 8, or 6 characters per second
(cps). The default setting is 15 cps.
Press F1 Message Display
This option allows you to enable or disable the message,
Press <
FI
> to run Setup that appears during the
power-up sequence. The default setting is Enabled.
System Boot Up Num Lock
This option sets the initial state (either On or Off) of the
computer’s Num Lock feature when the system boots. The
default setting is On.
Running the Setup Program 2-7