Filter
Top Products
Replacing the Computer’s Cover
1.
Make sure you did not leave any tools or loose parts inside
the computer. Check that everything is properly installed
and that all retaining screws are tightened.
2.
Hold the cover above the computer at an approximately
45 degree angle, as shown in the previous illustration.
Make sure the side of the cover with the retaining screw
holes faces the back panel.
3.
Lower the front of the cover down onto the computer case
and insert the lip of the cover beneath the edge of the front
bezel. Then lower the back of the cover into place.
4.
Replace the two retaining screws in the back panel.
5.
Reconnect all external cables to the system
Installing and Removing Options 4-3