Filter
Top Products
Removing a 3.5-inch Drive
Follow these steps to remove a drive from the 3.5-inch drive
carrier:
1.
Follow the instructions on page 5-4 to remove the drive
carrier from the computer.
2.
Remove the four screws securing the drive to the carrier.
(If you are removing
be secured with four
instead of the sides.)
a drive in the lower carrier bay, it may
screws on the bottom of the carrier
3.
Slide the drive out of the carrier. If you are removing the
diskette drive that came with your computer, you may
need to pull firmly because the drive fits snugly in the
carrier.
4.
When you finish removing or installing drives in the carrier,
see page 5-6 for instructions on reinstalling it in the
computer.
5-8
Installing and Removing Drives