Filter
Top Products
Follow the instructions on the screen to select a resolution
and the refresh rate it uses. When you see the Screen
Adjustment display, follow the instructions on the screen to
adjust the display parameters. If the adjustments are still
incorrect, use the controls on your monitor to make further
adjustments.
When you have set a refresh rate for each resolution, be sure
to save your settings.
3. The Power-Up Video Mode option is set to the default
setting of VGA (CVSO) , and you should probably leave it
at this setting. If you need to use a different video mode
each time you turn on or reset your computer, select this
option and set it to either EGA, CGA, MDA720X350, or
MDA640X400.
4. The VGA Memory Size option sets the amount of video
memory made available to VGA and Super VGA
applications. VGA drivers and VESA drivers may restrict
the resolution and color depth if you do not allocate
enough video memory. When the Mach32 accelerator is
running in accelerated modes, most Mach32 drivers
override this setting to ensure that enough video memory
is available.
If you have 1MB of video memory installed, the default
setting of Shared is correct for your system. If you have
2MB, you should select 512Kb.
5.
When you have selected all the correct settings, press F10 to
save the configuration.
The settings you selected become the power-on default
settings. If you need to change these settings temporarily, select
the Set Current Video Mode/Configuration option
from the Main Selection Menu and follow the instructions on
the screen.
6-10
Using the Video Utilities