Filter
Top Products
Now see the next section for instructions on testing the
graphics adapter.
Running the Graphics Adapter Diagnostics
You can test the operation of the Mach32 graphics adapter by
running the diagnostic tests on the AT1 Mach32 driver diskette.
You might want to run these tests after you set the power-up
configuration and later if you have any problems with your
adapter.
If you have not yet started the Mach32 installation program,
follow the instructions on page 6-7.
Note
Do not run the graphics adapter tests from an MS-DOS
window in the Windows program.
When you see the Mach32 installation program’s Main
Selection Menu, select Test Graphics Adapter. You see a
list of tests you can run. Follow the instructions on the screen to
run the tests and verify that your adapter is operating correctly.
Installing the Video Adapter Utilities
After you have configured and tested the graphics adapter, you
can install the Mach32 video adapter drivers and utilities.
To install the Mach32 drivers and utilities, follow the
instructions on page 6-7 to start the Mach32 installation
program, if you have not already done so. When you see the
Main Selection Menu, select Install Video Adapter
Utilities. Follow the instructions on the screen to install the
program files on your computer.
Using the Video Utilities
6-11