Filter
Top Products
16. See “Post-installation Setup” in Chapter 4 for instructions
on configuring your system with the new drive
configuration.
Removing a 5.25-inch Drive
Follow these steps to remove a 5.25-inch drive:
1.
Remove the computer’s cover; see Chapter 4.
2.
Follow the instructions on page 5-4 to remove the 3.5-inch
drive carrier from the computer.
3.
To remove the computer’s front bezel, locate the retaining
clips inside the computer’s front metal panel. Press the top
clip down and the bottom clip up to remove one side of the
bezel. Then repeat this step for the other side. The bezel
will still be connected to the computer by the LED cables,
so carefully lay the bezel next to the computer.
bezel
clips
filler panel clips
filler panel clips
4.
Disconnect the data and power supply cables from the
connectors on the back of the drive you are going to
remove.
Installing and Removing Drives
5-13