Filter
Top Products
Chapter- 3
Using Your Computer
This chapter briefly describes the following operations:
0
Stopping a command or program
0
Resetting the computer
0
Using the password
0
Changing the processor speed
0
Upgrading the BIOS.
Stopping a Command or Program
You may sometimes need to stop a command or program while
it is running. If you entered a DOS command that you want to
stop, try one of the following:
0
Press Pause
0
Press Ctrl C
0
Press Ctrl Break.
If these methods do not work, you may need to reset the
computer as described below. Do not turn off the computer to
exit a program or stop a command unless you have to, because
the computer erases any data you did not save.
Using Your Computer 3-1