Filter
Top Products
Removing the 3.5inch Drive Carrier
The 3.5-inch drive carrier in your computer holds the diskette
drive that came with your system and has an additional
3.5-inch drive bay you can use to install an internal drive. You
must remove the carrier from the computer before you can do
the following:
0
Install or remove any 3.5-inch drives in the carrier
0
Install or remove any drives in the 5.25-inch drive bay
0
Install or remove SIMMs on the main system board beneath
the carrier.
Follow these steps to remove the drive carrier:
1.
Remove the computer’s cover; see Chapter 4.
2.
Remove any expansion boards installed in the computer
See Chapter 4 for instructions.
3.
Disconnect the drive and power cables from the back of any
drive(s) in the drive carrier.
5-4 Installing and Removing Drives