Filter
Top Products
U s e r I n s t a l l a b l e F e a t u r e s
Li feBo ok 6 0 0 Series fr om F uji tsu
121
Connecting Devices to the LAN
Enhancement Unit or Base
Enhancement Unit
Connect devices to your LAN Enhancement
Unit or Base Enhancement Unit in exactly the
same way you would your notebook. Figures
4-1,4-2 and 4-3 show the location of LAN
Enhancement Unit ports and jacks.Figure 4-16
and 4-17 (pages 119 and 120) show the location
of the Base Enhancement Unit ports and jacks.
Hot Docking/Undocking your
LifeBook 690Tx
Your LifeBook 690Tx comes with a new hot
docking/undocking feature for the LAN
Enhancement Unit.
To Remove Your Notebook
from an Enhancement Unit
1. Put your combined notebook and
Enhancement Unit on a flat surface.
2. From the Start menu, click on Eject PC
or push the Undock Request Button on
your LAN Enhancement Unit.
Figure 4-6 Releasing Your Notebook
from an Enhancement Unit
P O I N T
It is always safe to undock if the power
switch is turned off
3. Wait for the Undock LED to illuminate.
4. Your system will not suspend.
5. Pull the levers on both sides of the LAN
Enhancement Unit forward until the rear of
your notebook rises slightly. (Figure 4-6.)
6. Tilt your notebook forward by grasping the
back of it with both hands.
7. Slide your notebook back until the align-
ment pins clear the alignment holes.
8. Lift your notebook clear.
9. Your notebook is fully operational without
going into suspend mode.
10. To return your notebook to the LAN
Enhancement Unit,simply follow the
procedure on page 120, to install your
Figure 4-5 Locking Your Notebook
in an Enhancement Unit