Filter
Top Products
U s e r I n s t a l l a b l e F e a t u r e s
Li feBo ok 6 0 0 Series fr om F uji tsu
123
EXTERNAL INSTALLATION
OF A FLOPPY DISK DRIVE
To install an optional external floppy disk drive,
you must purchase an optional external floppy
disk drive.
To Connect An Optional
External Floppy Disk Drive:
1. Close all files and exit all applications.
2. Turn off power to your notebook, close
the display and remove the AC adapter.
(See page 28 for more information.)
3. Align the connector of the optional external
floppy disk drive with the connector towards
the rear of your notebook with the wide side
of the connector down. (Figure 4-7.)
5. Insert the connector of the optional external
floppy disk drive firmly into the port on your
notebook until it clicks.
Figure 4-7 External Installation of a Floppy Disk Drive
To Disconnect An Optional
External Floppy Disk Drive:
1. Close all files and exit all applications
2. Turn off power to your notebook, close
the display and remove the AC adapter.
(See page 28 for more information.)
3. Squeeze the releases on the sides of the
optional external floppy disk drive connector
next to the body of your notebook together.
(Figure 4-7.)
4. Pull the connector free.
EXTERNAL LITHIUM ION
SMART BATTERY
Your external Lithium ion Smart battery is a
smart battery which is durable and long lasting
but should not be exposed to extreme tempera-
tures,high voltages, chemicals or other hazards.
Batteries should be removed and stored sepa-
rately in a cool dry place if your notebook is
not going to be used for an extended period
of time.
The external Lithium ion Smart battery is for
use in a dual configuration with the internal
Lithium ion Smart battery and will operate in
parallel or series with that battery. Parallel or
series operation is set in the BIOS. (See the
Advanced Submenu of the Power Menu,
pages 104–105).
C A U T I O N
The optional external floppy disk drive
must be installed or removed with the
power off.