Filter
Top Products
S e c t i o n F o u r
126
3. Insert the PC Card in the card slot, with the
product name label facing up. (Figure 4-9.)
4. The PC Card is fully inserted when the eject
button pops out.
5.Flip this button toward the front of your
notebook to fold it out of the way.
6. When the card is installed,lock it in place
by sliding the lock button to the right.
(Figure 4-9.)
C A U T I O N
Windows 95 has a shutdown procedure
for PC Cards that must be followed
before beginning to remove a card.
Installing PC Cards in Your Notebook
PC cards are installed in the PC Card slot in
the left side panel of your notebook. Some PC
Cards will not work when all possible devices
are enabled. If a PC Card is not recognized, you
will need to use the Control Panel, System and
then Device Manager and choose a system to
disable so that the resources can be used
by the PC Card.
C A U T I O N
Do not insert a PC Card into a slot if
there is water or any other substance
on the card. If you do, you may
permanently damage the card, your
notebook, or both.
C A U T I O N
Installing or removing a card while your
notebook is in the process of going
through the power on or power off
sequence may damage the card and/or
your notebook.
To install a PC Card:
1. See your PC Card manual for instructions on
installation of that specific card.
2. Make sure that there is not already a PC Card
in the slot. If there is, eject it, as described in
Removing PC Cards.
C A U T I O N
Some PC Cards can only be installed or
removed with the power in Suspend
mode or off. Please check the card
documentation for correct usage.