Filter
Top Products
S e c t i o n T w o
42
on,and hold it in until it is acknowledged
by activation of the selected mode. Which
mode is activated depends on the settings of
the BIOS setup utility Power Savings menu.
The default is Suspend mode. (See pages
88-89 for how to select Save-to-Disk mode.)
If your notebook is suspended,pushing the
Suspend/Resume button will return your note-
book to active operation at the point it went into
suspension. The Suspend/Resume button is
located next to the Status Indicator panel above
the keyboard of your notebook. (Figure 2-14.)
You can tell whether or not your system is in
Suspend mode by looking at the Power indicator.
(See pa ge 23.) If it is vi s i ble and not fla s h i n g, yo u r
notebook is fully operational. If it is visible and
flashing, your notebook is in Suspend mode. If it
is not vi s i bl e , the power is Off, the power is in the
Windows 95 pseudo-off state, or your notebook
is in the Save-to-Disk mode. (See pages 47-48.)
When you receive your LifeBook 600 Series it
wi ll be set for the default wh i ch is Su s pend mode .
C A U T I O N
Be sure you know what settings are
active for the Suspend/Resume button
before you use it as misuse can result in
data loss. (See the Power Savings Menu
of the BIOS setup utility, pages 88-89,
for more information.)
Figure 2-14 Suspend/Resume Button
Using the Suspend/Resume Button
When your notebook is active, the Suspend/
Resume button, (Figure 1-6 on page 5), can be
used to manually put your notebook into
Suspend mode, or into the Save-to-Disk mode.
Push the Suspend/Resume button, when your
notebook is active but no Access indicators are
P O I N T
Disabling the Suspend/Resume button
prevents it from being used to put your
notebook in Suspend mode or Save-to-
Disk mode. The resume function of the
button cannot be disabled.
C A U T I O N
The Suspend mode or Save-to-Disk
mode should not be used with certain
PC Cards. Check your PC Card
documentation for more information.