Filter
Top Products
S e c t i o n T h r e e
76
Menu Field Options Default Description
Base I/O address: 378; 278; 3BC. [378] Selects the Base I/O address for the parallel port.
(Displayed only when
the parallel port is set
to Enabled.)
Interrupt:(Displayed IRQ 7;IRQ 5. [IRQ 7] Sets the interrupt level for the parallel port.
only when the parallel
port is set to Enabled.)
Floppy disk controller: Enabled; Disabled. [Enabled] Turns on and off the floppy disk drive controller.
Local Bus IDE adapter: Both; Disabled; [Both] Sets up the IDE adapter.
Primary; Secondary.
Table 3-5 Fields, Options and Defaults for the I/O Device Configuration Submenu