T r o u b l e s h o o t i n g
Li feBo ok 6 0 0 Series fr om F uji tsu
151
3. The brightness is turned all the way up. 3. Turn down the brightness adjustment. The
higher the brightness the more power your
display uses.
4. The batteries are very old. 4. Replace the batteries.
5. The batteries have been exposed to 5. Replace the batteries.
high temperatures.
6. The batteries are too hot or too cold. 6. Restore the notebook to normal operating
(See Batteries on pages 29-31.) temperature. (The Charging icon on the
Status Indicator panel will flash when the
battery is outside its operating range.)
Shutdown and Startup Problems
The Suspend/Resume button does not work. 1. The Suspend/Resume button is disabled from 1. Enable the button from the setup utility.
the Advanced submenu of the Power Savings (See page 88.)
menu of the setup utility.
2. You did not hold the button in long enough. 2. Hold the button longer. This may need to be
a very long time if your app l i c a ti on is preven -
ting the CPU from ch ecking for but t on pushes.
3. There may be a conflict with the 3. Close all applications,and try the
application software. button again.
Symptom Possible Cause Possible Solution