Filter
Top Products
Chapter 13 PCI Slot Device Replacement 13-15
e. Using a Phillips screwdriver, tighten the green screw.
Be sure to stop tightening the screw when the bottom of the screw head is flush with
the projecting part of the handle. Otherwise, over tightening the screw may cause the
projecting part of the handle to break. (See
FIGURE 13-10)
FIGURE 13-10 Tightening the Screw
Caution – Align the PCI card with the slot guides, insert it carefully, and secure it firmly.
Caution – Do not forcibly push the PCI card when inserting it, even if it is not moving
smoothly. You may fail to insert the PCI card due to the presence of any obstruction in a slot
or any problem with a connector pin; and if you forcibly insert it, serious damage may result.
Screw head Projecting part of the handle