Filter
Top Products
vi SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
2.2.2 Labels About Handling 2–15
2.3 Operator Panel 2–17
2.3.1 Operator Panel Location 2–17
2.3.2 Appearance and Operations 2–18
2.3.3 LED 2–18
2.3.4 Switch 2–20
2.4 Determining Which Diagnostics Methods To Use 2–21
2.5 Checking the Server and System Configuration 2–23
2.5.1 Checking the Hardware Configuration and FRU Status 2–23
2.5.1.1 Checking the Hardware Configuration 2–24
2.5.2 Checking the Software and XSCF Firmware Configurations 2–24
2.5.2.1 Checking the Software Configuration 2–25
2.5.2.2 Checking the Firmware Configuration 2–26
2.5.3 Downloading the Error Log Information 2–26
2.6 Error Conditions 2–26
2.6.1 Predictive Self-Healing Tools 2–27
2.6.2 Monitoring Output 2–28
2.6.3 Messaging Output 2–30
2.7 LED Error Display 2–30
2.7.1 When target FRU is indicated by LEDs 2–31
2.7.2 When target FRU is not indicated by LEDs 2–31
2.8 Using the Troubleshooting Commands 2–34
2.8.1 Using the showlogs Command 2–34
2.8.2 Using the fmdump Command 2–34
2.8.3 Using the fmadm Command 2–35
2.8.3.1 fmadm config Command 2–35
2.8.3.2 fmadm faulty Command 2–35
2.8.3.3 fmadm repair Command 2–36