Filter
Top Products
18-10 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
FIGURE 18-6 Removing the Three-phase AC Section (Power Cabinet)
9. Place the removed AC section on an antistatic mat.
10. Mount the replacement AC section by following the removal instructions in Step 8 in
reverse order. Align the AC section with the slot guides, insert it carefully, press the
lever to the closed position, and secure it firmly.
Caution - The warning label on the AC section indicates that the terminal connection
sequence has been changed. Connect in accordance with the terminal sequence
described on the warning label.
FIGURE 18-7 AC Section with Warning Label
Peel off this label when you
connect the power lines.