Filter
Top Products
Appendix D UPS Controller D-5
D.5 UPS Cable
The UPS cable specifications are as follows:
■ Connector type
D-SUB9 pin Male (install side: Female)
DEU-9PF-F0
■ Terminal array
FIGURE D-2 identifies the pin signals of the UPC port and UPS cable.
Do not use the unused pins (pin number 2, 3, 4, and 8 in
FIGURE D-2). The pins on the
cable side are shown below:
FIGURE D-2 Correspondence between the UPC Ports and the UPS Cable Pins
Note – If you need UPC cables, make arrangements separately. For details, contact your
sales representatives.
Note: Do not connect to the ER signal pin.
(Note)
*BTL
*BPS/*UALM
*ACOFF
SG
ER
UPC port side UPS cable side
*BTL
*BPS/*UALM
*ACOFF
SG
1
2
3
4
5
6
7
8
9
Pin # Signal name
---
---
---
---