B-8 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
B.3 Memory
The type of memory used is DIMM.
FIGURE B-3 shows the memory.
FIGURE B-3 Memory
The memory has the following characteristics.
■ Active maintenance of memory is possible using the DR function.
■ Maintenance or installation of a DIMM module involves removing or installing a CMU.
■ The category of the DIMM as specified by capacity and type is as follows:
■ DIMM-1GB
■ DIMM-2GB
■ DIMM-4GB
■ DIMM-8GB
■ Depending on the DIMMs used, the label format of component numbers and serial
numbers differs.