Filter
Top Products
A-1
APPENDIX
A
System Configuration
This appendix describes the installation conditions and configuration of the M8000/M9000
server.
■ Section A.1, “Installation Conditions” on page A-1
■ Section A.2, “System Configuration” on page A-2
A.1 Installation Conditions
The basic component of a domain configuration is the system board. The system board
consists of only a single CPU/memory board unit (CMU), or it consists of one CMU and one
I/O Unit (IOU).
The system board mounting conditions are as follows:
■ CPU Module (CPUM)
Mount either two sets of two CPUMs, or one set of four identical CPUMs on the CMU.
In the M8000/M9000 server, the SPARC64 VI processor, SPARC64 VII processor, and
SPARC64 VII+ processor can be mounted together.
Be sure to use the same type of CPUM in each pair (CPUM#0 and CPUM#1, or CPUM#2
and CPUM#3).