Filter
Top Products
15-8 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
FIGURE 15-5 Removing the Tape Drive Unit (Front of the M9000)
14. Place the removed tape drive unit on an antistatic mat.
15. Mount the replacement tape drive unit by following the removal instructions in
Step 13 in reverse order.
Align the tape drive unit with the slot guides, insert it carefully, and secure it firmly.
16. Attach the tape drive unit to the port.
Execute the cfgdevice -c attach -p port no. command of XSCF.
17. Confirm that the replaced tape drive unit is configured to the domain.
From XSCF, execute the cfgdevice -l command to verify that the specified Port
number is displayed in the current connection.
18. From the OS, execute the cfgadm -c configure TAPE_Ap_Id command to
configure the tape drive unit to the domain.
19. From the OS, execute the cfgadm -c configure DVD_Ap_Id command to
configure the CD-RW/DVD-RW drive unit to the domain.
# cfgadm -c configure c0::rmt/0
# cfgadm -c configure c0::dsk/c0t4d0
1
2