Fujitsu M8000 Server User Manual


 
2-34 SPARC Enterprise M8000/M9000 Servers Service Manual October 2012
2.8 Using the Troubleshooting Commands
After the message in TABLE 2-8 is displayed, you might desire more information about the
fault. For complete information about troubleshooting commands, refer to the Oracle Solaris
OS man pages or the XSCF Shell man pages. This section describes some details of the
following commands:
Section 2.8.1, “Using the showlogs Command” on page 2-34
Section 2.8.2, “Using the fmdump Command” on page 2-34
Section 2.8.3, “Using the fmadm Command” on page 2-35
Section 2.8.4, “Using the fmstat Command” on page 2-36
2.8.1 Using the showlogs Command
The showlogs command will display the contents of a specified log in order of timestamp
starting with the oldest date. The showlogs command will display the following logs:
error log
power log
event log
temperature and humidity record
monitoring message log
console message log
panic message log
IPL message log
2.8.2 Using the fmdump Command
The fmdump command can be used to display the contents of any log files associated with
the Oracle Solaris Fault Manager.
XSCF> showlogs error
Dated: Mar 30 12:45:31 JST 2005 Code: 00112233-44556677-8899aabbcceeff0
Status: Alarm
Component: PSU#1,PSU#2
Msg: ACFAIL occurred (ACS=3)(FEP type = A1)
Date: Mar 30 17:45:31 JST 2005 Code: 00112233-44556677-8899aabbcceeff0
Status: Faulted
Component: PSU#1,PSU#2,*
Msg: ACFAIL occurred (ACS=3)(FEP type = A1)
XSCF>0