Filter
Top Products
6. WEB FUNCTIONS
6-14
6.1.5 WAN settings
The network equipment (PC, etc.) connected to the FELCOM can be divided into mul-
tiple groups to get independent data connection for each group. For example, you can
have a group for office use and a group for private use. In this way crew members can
pay for their own personal communication charges, making it unnecessary to limit
communications. The Network Administrator is responsible for the entry of WAN-re-
lated settings.
WAN group setting
Click [Settings] in the menu bar, then [Network settings] and [WAN] in the sub-menu
to the WAN group setting screen. The connection list has one group (group name: De-
fault) registered to the list.
Item Description
Enabled/Disabled Enabled: VRRP valid, Disabled: VRRP invalid (default). The set-
tings mentioned below cannot be changed when [Disabled] is
active.
Name Enter name of virtual router. (alphanumeric input, a maximum of
50 characters)
IP address Enter the IP address (IPv4) of the virtual router.
VRRP ID (1-255) Enter VRRP ID (numeric input, 1 - 255).
VRRP Tx interval Enter VRRP transmitting interval (numeric input, 1 - 99).
Priority (1 - 254) Enter priority (numeric input, 1 - 254).
Preempt mode Enable or disable the preempt mode. [9] indicates enabled. De-
fault: enabled
Status Show status (Master, Backup, Error enabled/disabled).
Apply button Click to apply settings.
Cancel Restore previous settings.
*
*: Connection list
No. of registered groups/Total no. of groups available